PipePatrol Tightness Monitoring

Solution for detection of small and gradual leaks

  • Detection of gradual leaks using standard pressure and temperature instrumentation
  • Continuous and automatic reporting according to regulatory requirements
  • Avoid negative effects on normal pipeline operation

PipePatrol Tightness Monitoring

Solution for detection of small and gradual leaks

  • Detection of gradual leaks using standard pressure and temperature instrumentation
  • Continuous and automatic reporting according to regulatory requirements
  • Avoid negative effects on normal pipeline operation

Overview

Small or gradual leaks are often not covered by standard systems, as pressure and temperature changes along the pipeline can mask small losses. The detection solutions possible are normally time and cost intensive.

PipePatrol Tightness Monitoring is a method for the detection of gradual leaks using standard pressure and temperature instrumentation. This solution completely fulfils the requirements of TRFL 2017 and VdTÜV Bulletin 1051. It automatically creates a report according to these regulations and has been validated by independent 3rd party authorities. PipePatrol Tightness Monitoring avoids the classical pressure tests where the pipeline has to be filled with water, as it works with the actual gas or liquid in the pipeline, avoiding any negative effects on normal pipeline operation.

  • Fulfils German requirement TRFL 2017 and VdTÜV Bulletin 1051
  • Export of data for further analysis tools
  • Easy retro-fit through variable interface (OPC-Server)
  • Approved by independent 3rd party authority

Related products

OPTIBAR PC 5060

Pressure transmitter for advanced process pressure and level applications

  • Robust design, with corrosion and abrasion resistant ceramic diaphragm
  • 25 mbar…100 bar / 0.73…1450 psi; max. +150°C / +302°F
  • Various threads, flanges, hygienic and other connections
  • 2-wire, 4…20 mA, HART®, FF, Profibus-PA, Bluetooth®

OPTITEMP TRA-TF56

Resistance (RTD) temperature assembly for higher flow velocities and pressures

  • Flange connection
  • ASME-style, barstock thermowell with tapered tip
  • -40…+600°C / +1100°F

OPTITEMP TRA-TS53

Resistance (RTD) temperature assembly for higher flow velocities and pressures

  • Thread connection
  • ASME-style, barstock thermowell with reduced tip
  • -40…+600°C / +1100°F

OPTITEMP TRA-W30

Resistance (RTD) cable sensor for surface temperature measurement in industrial applications

  • Hose clamp connection
  • PTFE insulated copper contact plate for fast response times
  • -50…+200°C / -58…+390°F

Related solutions

PipePatrol Health Check

Complete pipeline leak detection audit

  • Complete audit of all areas of leak detection on an operator‘s pipeline or pipeline network
  • The PipePatrol Health Check system covers fundamental aspects, the physical state, the performance and the compliance with standards and regulations

PipePatrol Leak Detection

Solution for pipeline leak detection and localisation

  • E-RTTM (Extended Real Time Transient Model) based leak detection and localisation
  • Highly accurate and extremely reliable leak information
  • Meets API 1130, API 1175, AB 864, German TRFL standards and CSA Z662
  • System is either independent, or can be integrated with existing systems

PipePatrol Theft Detection

Solution for product theft detection

  • Fast and reliable identification and localisation of unauthorised or illegal product discharges
  • Dedicated theft pattern recognition for product theft detection
  • Initiation of alarms within minutes to stop theft in the act

PipePatrol Line Break Detection

Solution for pipeline rupture detection

  • Efficient and instant detection of pipeline ruptures, especially for high consequence areas
  • Pipeline rupture pattern recognition system for automatic emergency shutdown
  • Reliable and fast acting response systems and procedures to minimise environmental effects and danger

PipePatrol Predictive Modeling

Solution for prediction of pipeline conditions

  • Simulation tool to predict pipeline conditions from current operating and manually definable static data
  • Forecast future events and states of pipelines

PipePatrol Batch Tracking

Solution for batch and interface tracking in multi-product pipelines

  • Determination of the position of a batched product and identifying the mixing zone
  • Predictions for arrival times and amounts of pure product available
  • Safe operation and optimum capacity use of the pipeline

PipePatrol Tightness Monitoring

Solution for detection of small and gradual leaks

  • Detection of gradual leaks using standard pressure and temperature instrumentation
  • Continuous and automatic reporting according to regulatory requirements
  • Avoid negative effects on normal pipeline operation

PipePatrol Stress Monitoring

Solution for monitoring of pipeline lifetime stress

  • Evaluation and documentation of lifetime stress
  • Assessment of the remaining pipeline service life
  • Monitoring of pressure measurements at sensor points

PipePatrol Cyber Security

Cyber security solution for pipeline management

  • Complementing solutions for pipeline monitoring and protection
  • Protection against cyber risks
  • Secure communication, fulfilling the latest standards

PipePatrol Data acquisition

Data transmission solution for pipelines

  • Reliable systems for data acquisition and transmission and components for data encryption
  • Particularly safe communication, fulfilling the latest safety standards
Email
Contact